Add a new device
With this mask, you can enter and configure a new main device or reader.
Select device type
Top left can be between main unit and reader be elected.
By default, main unit selected.
Activate device
Activate the device using the slider Active (top right) if you want it to be ready for immediate use.
Fill out device information
Feld
description
type
Device category, e.g. “MAINLY” (required field)
UUID
Unique device identifier. It is generated automatically.
Name
Freely selectable device name for better identification.
description
Optional field for additional information.
manufacturer ID
Select the device manufacturer from the list.
administrative unit
Assign the device to an administrative unit.
client
Client to whom the device is assigned. Default: “WEBCLIENT
input type
Type of input (e.g. keyboard, card, fingerprint).
Valid from/to
The period of time during which the device may be active.
network settings
Select the network protocol.
By default, HTTPS selected.
Feld
description
serial number
Serial number of the device. Mandatory for online devices
password
The terminal sets up the connection to the HTTPS server itself. It authenticates itself using HTTP Basic Authentication with its serial number and a password
The serial number is entered without hyphens.
The password must be identical to the password that was stored in the HTTPS client settings in the terminal configuration via INTUS RemoteConf.
The HTTPS server only accepts the connection if the password sent by the terminal matches the one set here.
Connected devices
If you want to pair the main unit with a reader:
Click “+ Connect Reader.”
Select an existing reader or enter a new one.
A selection or dialog for pairing existing reader devices opens. After connecting, the readers are displayed in a list with the following columns:
Feld
meaning
device name
Connected reader display name
Customer position
Location/area of the device at the customer
Status
Reader connection/operation status
This section allows you to provide a device with further information that goes beyond the basic configuration.
Feld
meaning
inventory number
Internal number for unique identification in the inventory system. Useful for IT or maintenance management
time zone
Select the time zone in which the device is operated (e.g. “Europe/Berlin”). Important for time controls
holiday calendar
Select a calendar with regional holidays. These can have an influence on access rights, schedules or blocking periods, for example
Complete the process
With Cancel The process is closed without saving.
With Save The new device is created.